Sine Tamer Dirty Electricity Whole House Filter

Dirty Electricity - this is a term that few people know about, but is becoming more well known in the area of EMF remediation.

The recently popular way to deal with dirty electricity is to use plugin capacitance-based Stetzer style filters. Most people who are interested in mitigating dirty electricity will buy these type of filters, along with an EMI meter sold by the same company.  They test the field with the meter, then plug the filter into an outlet, and finally will plug in the EMI meter to test the line again, and the EMI shows a reduction in signal.

To the layperson with no electrical background and understanding, this can seem impressive. However, these type of filters can actually make the magnetic component on the line much worse, as we will detail in full below.

Dirty electricity not only has health impacts, but it can also impact all your electronics that are connected to the mains power!

A basic understanding of “Dirty Power” is, “electricity that does not behave in the way we expect it to” and behaves erratically instead. Our homes have electrical systems that “expect” a specific voltage and frequency.  When the electricity that is delivered to our homes does not match these expectations, the result is, failing and malfunctioning equipment.

Erratic Electrical Problems include:

• Power interruptions
• Power sags and swells caused by a variation in RMS voltage
• Variations in the frequency of the power
• Unbalanced voltage
• Surges or Transients in the voltage
• Waveform distortions

We interviewed Terry Stotyn of Cratus Canada LTD (video interviews posted below), who makes our SineTamer to exacting specs here in the USA.  We partnered with them, as they have the best dirty electricity solution we have found anywhere, when compared to other dirty electricity remediation approaches. Their technology uses frequency attenuation and can monitor 360 degrees of the sine wave, which an oscilloscope will clearly demonstrate.

We recommend that you read through the text below to orient yourself with dirty electricity and the terminology. Then watch the two interviews we conducted with Terry in order to better understand what we are talking about, and to hear new information he has never shared in interviews previously. 

Dirty Electricity Deep Dive with Terry Stotyn & Brandon Amalani (Part 1):

Dirty Electricity Exposed: Why Most Devices Make It WORSE - and What Actually Works (Part 2):

It appears that many online outlets do not fully educate people on all the aspects of dirty electricity in a comprehensive way. Our goal is provide the most accurate information and the best solutions we have found, so you can make the most informed choice about how to protect your family and electronics from dirty electricity.

Sine Tamer will only help with the power coming into your house, and is not a viable solution for all types of EMF, especially incoherent EMF transmitted from Wifi routers, cell towers, etc. These devices transmit a lot of incoherent noise on their carrier waves that affects our cellular biology.  For years, we have recommended Blushield EMF protection products.  On top of all the years of anecdotal testimonials and positive effects on livestock, Blushield is the only EMF protection device with an independent review board certified clinical trial and PubMed indexed peer reviewed medical journal paper that demonstrates its effectiveness across multiple biomarkers.  You can read about that here.

That being said, if you can reduce the field effect that dirty electricity creates in your home, the better off you will be regarding your EMF hygiene. We have personally noticed a beneficial effect and after vetting everything we could get our hands on and all the companies we could speak with, we landed on Sine Tamer as our favorite dirty electricity solution for a number of reasons we will outline below.

Dirty Power and the Health Risks

“Dirty Power/Electricity” is a term utilized in many conversations these days, and it relates to the conditions made by the different power providers, and their processes of producing the power we utilize in our power grids of today.  The terms “Dirty Power” and “Dirty Electricity” are one and the same.  The byproducts that are a result of producing power for our usage are corrupted with anomalies that were not in existence 20 years ago, but have been introduced onto our power systems from the new high-tech, faster technology of our electronics and the computer age.

This may seem complicated, but the message is, “Dirty Electricity/Dirty Power” is unpredictable energy that causes damage to devices attached to your electrical system, and has detrimental health side effects.

The traditional power that has been supplied for decades by our electrical service providers has been relatively clean for over a hundred years, but due to increasing demand, additional sources have been required in order for the power providers to be able to keep up with the increased demand for electricity. These new sources of electricity that have been added to our traditional power come from new technological advancements in wind generated power systems, water generated power systems, and solar generated power systems.

All of the “Dirty Power” produced by these systems comes from their inverters. Inverters are an intricate part of all secondary power production, and they are utilized to switch the DC power produced in the process and convert it to AC power, the type that powers appliances and devices throughout our homes.  It is important to note that this generated form of “Dirty Power” can be significant in strength, travels for miles on top of our generic power, and does not weaken with distance. All of these newer power generating systems and their advanced technology unfortunately have byproducts of their production that are detrimental to the operation of our everyday sensitive electronics and electrical systems.  These byproducts are a form of transients, which become part of the regular Hz frequency of our everyday power. They are introduced onto our power lines in the kHz to MHz frequency ranges, which are higher RF or radio frequencies. 

These higher frequency transients are produced by the switch mode power supplies of Smart Meters and the Smart Grid.  RF or kHz frequencies have been studied for decades by doctors and militaries worldwide, and found to have serious health risks on the human body.  These higher frequencies flow on top of the regular power circuit wiring within a home or building, thereby becoming an antenna, and are produced by the Smart Meters' internal components.  Radiation of these frequencies is emitted outward from the internal wiring approximately 5-7 ft into the room from the walls.  According to many reports on this form of radiation, it breaks down the cell structure within the human body, and can cause numerous serious health problems.

Surge Suppression was originally designed by our engineers over 40 years ago for the sole means of protecting our buildings and houses from the effects of devastating lightning strikes. This technology has remained relatively untouched for all manufacturers of suppression equipment ever since.

This older 20th century technology was adequate for protecting electrical systems from lightning and power provider anomalies for many years, but over time, our computer and microprocessor technology has evolved enormously, supplying society with extremely fast production equipment as well as the ability to function in our lives virtually wirelessly.

Over time, our microprocessor technology has continued to get faster and faster, and itbecame apparent to our engineers that a newer, more sensitive technology needed to exist in our suppression. A technology that can not only keep up with the ever-changing trends of our speedy computers, controls, and microprocessors, but a new circuitry protection was requiredto mitigate the effects of the dirty power conditions. Dirty power is comprised mainly of transients, which are a temporary rise in volts and current of a high energy and short duration.

Transients disrupt, damage, or destroy our electrical and electronic equipment in an instant and/or cause cumulative damage over time resulting in unexplained failures or costly downtime. 

Our sine wave forms have become corrupt with transients and the normal clean sine wave form has disappeared, with the new norm pictured below, or most often, significantly worse.

Older suppression technology incorporates fixed clamp technology. Simply explained, protection is clamped at a fixed level above and below the sine wave form.

When the transients gain a height of the clamps within the suppressor, they are clipped off at the predetermined levels as shown on next diagram. This however is 20th century technology, when the prime protection required was for catastrophic electrical anomalies like lightning or shorted main wires from the power service provider. This technology has little or no effect on any of the transients within the sine wave form. The transients within the sine wave form are the most harmful to our newer 21st century electronics and microprocessors.

SineTamer’s unique Frequency Attenuation Circuitry brings about this kind of resulting protection no matter what level or severity that the transient anomaly induces.

Should I Be Concerned About Dirty Power?

This might all seem very worrying, and you are right to be concerned.

Symptoms can vary, and an individual can have many symptoms associated with this form of “Dirty Power”.


List of Symptoms:

• Sleep problems (insomnia, difficulty falling asleep, night waking, nightmares)
• Stress, agitation, anxiety, irritability
• Headaches, sharp pain or pressure in the head
• Migraines
• Ringing in the ears, ear pain, high pitched ringing
• Tinnitus
• Concentration, memory or learning problems
• Fatigue, muscle or physical pain
• Disorientation, dizziness, or balance problems
• Eye problems, including eye pain and pressure in the eyes
• Cardiac symptoms, heart palpitations, heart arrhythmias, chest pain
• Leg cramps, or neuropathy
• Arthritis, body pain, sharp, stabbing pains
• Nausea, flu-like symptoms
• Sinus problems, nosebleeds
• Respiratory problems, cough, asthma
• Skin rashes, facial flushing
• Urinary problems
• Endocrine disorders, thyroid problems, diabetes
• High blood pressure
• Changes in menstrual cycle
• Hyperactivity or changes in children’s behavior
• Seizures
• Recurrence of cancer
• Contracting cancer, brain cancer
• Brain tumors
• Rise in electro-sensitivity disorder

The Larger Concerns About “Dirty Power”

A terrible thing about having a corrupted source of “Dirty Electricity” is that it also affects us, the people, that live in the vicinity of “Dirty Power”. Dr. Sam Milham has studied and written books about these conditions, and his newest book entitled Dirty Electricity is a very good study on the health effects of both power and “Dirty Power”.

You cannot see, hear or smell the problem!  Making it difficult to imagine that there is a problem at all. The problem is electrical pollution. This type of pollution can have a very detrimental effect on our health.  Just as dangerous as polluted water delivered to your home’s taps, “Dirty Power” delivered to your home circuitry causes a significant health risk to the homeowners.  The effects of RF/EMF (radiofrequency electromagnetic fields) on humans and animals are well documented.  Studies have indicated that cancers, ADHD, brain tumors, heart palpitations, diabetes and behavioral problems may all have a common link to “DIRTY POWER”.  It has been shown to cause problems with human cell “deterioration”, as well as adding to the effects of Electro-Hypersensitivity Syndrome (EHS), which many people suffer from currently, and is growing dramatically every year.  This “Dirty Power” RF kHz frequency has been categorized as a type 2 carcinogen by the World Health Organization (WHO).

The SineTamer® brand of surge suppression has been in existence for approximately 20 years, and has been helping industry of all sizes, governments, and the military clean their power, enabling their sensitive electronics and equipment to function normally.

The SineTamer® is not like your average surge suppressor sold in today’s market.  It is an engineered transient disturbance filter that monitors 360° of the sine waveform, not at all like the fixed clamped protection of all other units sold today.

The SineTamer utilizes patented circuitry, which enables it to mitigate large transients introduced into our power systems from lightning strikes, right down to the smaller transients from our switches, motors, and electronics, which include the RF kHz frequencies.

This gives the Sine Tamer the ability to provide full spectrum protection and regulation of the sine wave throughout your entire home or office! 

The SineTamer® is effective in mitigating the kHz frequencies to lower than 1 volt RMS throughout the day, cleaning the power and freeing it from harmful anomalies on the sine wave.  Due to one-of-a-kind circuitry within the SineTamer suppression units, it is the only product worldwide which cleans our buildings' power systems, making them safe for humans, as well as producing a near perfect sine wave for our sensitive equipment to function like it was intended. 

It is important to know that these “Dirty Power” transient anomalies on the various forms of power providers equipment can be mitigated at the source of transmission. The SineTamer® suppression units are extremely effective, when correctly installed.

 SineTamer® is the only true product of its kind to remove the harmful anomalies of “Dirty Power” to a near zero level, and to supply our houses and buildings with true, clean, non-harmful power.